- length – 6 560 mm*
- width - 2 750 mm*
- height - 3 020 mm*
- unladen weight – 2 800 kg
- gross weight – 11 300 kg
- number of wheels - 2
- chassis type - single-axle
- load on hitch – 13 KN
- required tractor horsepower - 80 HP
- filling time – 4 min
- spreading spoon spilling width - 14m
- vacuum pump capacity (air flow) – 6500 l / min
| Capacity |
Number of axles |
Wheel track |
Wheel setback |
Tyres |
Compressor |
| 8 000 litres |
1 |
2000 |
220 / 275 / 8 |
560 / 60 R22,5 |
JUROP PN 58M / MEC 6500 |
| 2100 |
600 / 55 x 26,5 |
| 2150 |
700 / 50 x 22,5 |
*refers to slurry tankers on tyres 560/60 R22,5
The data provided above is for informational purposes only. Therefore, they do not constitute a sales offer and cannot be used directly in a tender without prior consultation with the sales department.
Product photos included in the gallery are illustrative and may differ to a greater or lesser extent from those delivered to the customer. In addition, photos may contain additional options that are not included in the standard equipment.
Slurry tanker’s standard equipment:
- Adaptation for injector or dribble bars mounting
- Steel tank, hot galvanized
- Internal strengthening rings
- Baffle
- Overflow safety device
- Overflow tank
- Sight-glasses
- Manometer
- Safety valve
- Float valve
- Emergency hand-brake
- Damper – oil recuperator
- Lifted spreading spoon
- Electro-lighting (LED) system
- Closed backdoor
- Replaceable tow eye Ø 50 mm (other diameter is also possible)
- Plugged lateral and rear outlets
- Plugged 2" discharge pipe
- Galvanized mudguards
- Mechanically adjustable jack
- Ø 600 mm rear hatch
- Ø 600 mm top hatch
- 5" couplings PERROT type (or 4" fire couplings)
- Manual 5" gate valve
- Hydraulic 5" gate valve
- 5" (Ø 125 mm) suction hose with a suction strainer, 6 m long
- Hydraulic system for injectors or dribble bars supply
- Double-line pneumatic braking system with air brake valve (or hydraulic braking system)
The data provided above is for informational purposes only. Therefore, they do not constitute a sales offer and cannot be used directly in a tender without prior consultation with the sales department.
Slurry tanker’s additional equipment:
- EU approval
- Aluminium side boxes for suction hoses
- Additional 5” manual gate valve
- Dribble bar with dragged hoses type 3
- Simple ladder
- Folding ladder
- Sprung drawbar
- Mud flap
- Upper transport drawbar
- Hydraulic supporting jack
- Hydraulic control of compressor
- Air Over Hydraulic Brake System
- Wheel chocks (2 pc)
- Compressor JUROP PN 84M / MEC 9000
- Flashing beacon light
- Searchlight
- Tank adaptation for hydraulic worm stirrer
- Hydraulic worm stirrer
- Sprung axle
- Float level indicator
- Two-sided distributor
- One-sided distributor
- Distributor with disc 5"
- Distributor with disc 6"
- Drainage pipe with 2” valve
- Half-opened suction pipe 6" + hydraulic control of compressor
- Glass-tube level indicator
- Toolbox 500x400x350 [mm]
- Manual control of hydraulic devices
- Box with solenoid valves + control panel
- Quick connection for 5” suction hose attachment
- Quick connection for 6” suction hose attachment
- PTO shaft
- Additional 3” sight glass
- 2" hose with fire couplings and drainage knee
- Hydraulic plunged 5” hose mounted on the back
- Hydraulic plunged 6” hose mounted on the back
- 5” suction hose - extender L=6 m
- 6” suction hose - extender L=6 m
- Ø 420 mm hydraulically opened upper hatch
- Ø 420 mm manually opened upper hatch
- Ball coupling
- Swivel tow eye (other diameter is possible)
- Hand wash water tank
- Red-white warning plates (4 pc in set) and warning trianlge
- Fittings change from 5" into 6" (hose + valves)
